Data, presented simply
Images, maps and models of your location, collected automatically and offered in a clear overview. You use them as they are or take them into your own system.
A total solution. You only deal with the results.
A drone set-up at your location collects data automatically, at fixed times or on demand. You get it presented simply and can use it further in your own system.

A drone stands charged and ready in a weatherproof base station at your location. At a set time or on demand it flies its route, lands and sends the data on.
At AirScout, drone-in-a-box is a total solution. The set-up automatically collects data from your location, and you work with what it delivers.
What you getData from your location, ready to work with.
One total solution, managed by AirScout
Two examples, from question to result. The numbers in the animations are illustrative.
How far the solution goes is something we decide together in the project phase.
Images, maps and models of your location, collected automatically and offered in a clear overview. You use them as they are or take them into your own system.
If you also want the data interpreted, we develop that together with specialised software partners.
Every location and every question is different. That is why we work per project.
What do you want to follow up, how often and what do you do with the results?
The right combination of hardware, software and partners for your situation.
The set-up is installed and configured until the first results are right.
The solution runs, we remain your point of contact and adjust where needed.
Optional: development of analysis or AI. Runs as a separate track alongside the project, together with software partners.
When an alarm goes off or something deviates, the drone flies to the spot, checks what is happening and records it on camera. Fixed patrol rounds over industrial estates, storage yards and other sites are also possible.
Roofs, façades, solar parks and technical installations, each time with the same route and the same settings. That makes the images comparable from week to week and from year to year.
A fixed flight every week or month produces an up-to-date orthomosaic and 3D model. Progress, volumes and changes on the site become measurable.
With a thermal camera the drone detects anomalies in solar panels, industrial installations and heating networks. Regular follow-up makes it possible to see an anomaly grow before it turns into a failure.
Crop monitoring at fixed moments in the season: differences in growth, losses and stress within a single field or orchard, captured in maps that you can compare over time.
Follow up telecom, antenna and lighting masts, chimneys and towers from the air. The drone captures the structure from bottom to top without anyone having to climb, and marks spots with deviating finish or loose parts.
A pilot on site and a Dock solve different questions. Many assignments still call for a pilot. A Dock pays off when the same task recurs often at the same place.
| Feature. Side by sideBoth are fully fledged systems with their own emphasis. Which one fits depends on the location, the task and the sensor you need. | Dock 3DJI Dock 3Charges the aircraft inside the station. Strong in mapping, mobile deployment and light installations. |
Dock 4DJI Dock 4Swaps the battery automatically. Strong in flights shortly after one another, alarm response, thermal inspection and cold sites. |
|---|---|---|
| Compatible aircraft | Matrice 4D (visual) or 4TD (thermal) | Matrice 5TD (thermal) |
| Between two flights | Charging in the aircraft: ±27 min (15 → 95 %) | Automatic battery swap: < 25 s, airborne again < 45 s |
| Maximum flight time of the aircraft | Up to 54 min | Up to 59 min |
| Maximum speed | 15 m/s | 21 m/s |
| Thermal camera | Matrice 4TD | Matrice 5TD, higher thermal resolution than the 4TD |
| On-board AI recognition | People, vehicles and vessels | 17 object types |
| Operating temperature of the Dock | −30 to 50 °C | −40 to 50 °C |
| Protection | Dock IP56, aircraft IP55 | Dock IP56, aircraft IP55 |
| Connectivity and RTK | Built into the Dock | Via the separate DJI O4 Ground Station |
| Weight of the Dock | 55 kg (without aircraft) | 66 kg (without aircraft and batteries) |
| Maximum power supply | 800 W | 2.000 W |
| Mobile deployment | Can be mounted on a vehicle | Aimed at fixed sites |
| Strong in | Mapping and 3D with the Matrice 4D, mobile deployment, sites with limited power | Flights shortly after one another, alarm response, thermal inspection, cold sites |
Data according to DJI Enterprise (Dock 3, Dock 4) and specialised distributors, as of October 2026. Times were measured under DJI test conditions and serve as a reference. Product photos: DJI.
No. AirScout delivers drone-in-a-box as a total solution and brings hardware, software and project guidance together in one project. You only deal with the results.
As images, maps and models of your location, presented simply and usable in your own system. If you also want the data analysed, we look in the project phase at whether we deliver the analysis or you get a system that receives analysed images.
A drone dock, also called drone-in-a-box, is a weatherproof base station in which a drone stands charged and ready for take-off. From the dock the drone can take off, fly a fixed route, return, land and charge again. The recorded images and data are sent to a platform.
Both systems work on the same principle: an automatic base station with a drone that flies on demand or on a schedule. Dock 3 charges the aircraft inside the station (about 27 minutes from 15 to 95 %), is lighter, can be mounted on a vehicle and suits mapping with the Matrice 4D. Dock 4 is the newer generation and swaps the battery automatically in under 25 seconds, which makes flights shortly after one another possible. It works with the thermal Matrice 5TD and down to −40 °C. Both are fully fledged systems; which one fits depends on the location, the task and the sensor you need. AirScout works with both and chooses per project.
A pilot comes to the location for each assignment and adapts the flight to what they see on site. That suits one-off assignments and custom work such as 3D models, 360° imagery and mapping. A Dock is permanently on site and flies on a schedule or on demand, each time with the same route and settings, and sends the images automatically to a platform. That suits tasks that recur at the same place. The two approaches complement each other.
A Dock is mainly suited for tasks that recur at the same place: periodic inspections, monitoring of construction sites and terrain, thermal follow-up of installations, crop monitoring and security patrols. For one-off assignments a classic drone flight is usually more efficient.
Yes. Dock 3 works with the thermal Matrice 4TD, Dock 4 with the thermal Matrice 5TD. They make it possible to follow temperature differences in solar panels, installations and pipes.
Depending on the application: images and video, orthomosaics and 3D models, thermal maps, reports and GIS files. Recurring flights build a time series in which changes become visible.
Get in touch with the location and your question. Together we look at whether a Dock makes sense or whether a classic flight is a better fit.
Tell us what you want to follow up. We will work out a tailored proposal.